• Creates a water seal and still allows concrete to breathe and remain hydrated
• Seals micro-cracks
• Densifies concrete
• Stops carbonation penetration and damage
• Significantly retards chloride penetration and damage
• Removes chlorides from existing concrete
• Improves freeze-thaw resistance
• Nontoxic & environmentally friendly
• Increases compressive and flexural strength
• Protects rebar from corrosion
• Retards dusting, pitting, and rutting
• Evacuates greases and oils
• Accelerates curing of freshly finished concrete

▪ DensiCrete has had the following tests completed to date:

ASTM #C-42 Compressive and Flexure Strength (normal strength concrete)
Compressive: 29% increase to 4,740 PSI
Flexure: 28% increase to 543 PSI

ASTM #C-666 Freeze Thaw - Test stopped at 300 cycles

Carbonation Test - Estimated 10 year exposure rate
Treated sample: No penetration
Untreated sample: Over 1/2 inch

AASHTO T- 260 Chloride Evacuation Test - Evacuated Over 50% of Total Chlorides

AASHTO T-259 - Chloride Ion Penetration Test
Treated sample: 1.85lbs/cubic yard
Untreated sample: 28.85lbs/cubic yard

Passed skid resistance test - SHE-75-14.9

ANSI / NSF - Standard 61 - COMPLIANT (Product is NON-TOXIC and therefore may be used on cementitious materials that come in contact with POTABLE WATER)

replaces and/or displaces the following:

- Silanes and Siloxanes- dangerous petrochemical based surface coatings
  which  eventually will wear off
- Linseed Oil - wears off quickly and is diluted 50% with turpentine
- Paints/epoxies which are used as surface sealers These do not allow concrete
   to  breathe and eventually will cause the concrete to powder

▪ DensiCrete  application methods:

- Low pressure spray rate of 150 square feet (11 mil) per coat - 2 to 3 coats
  typically required
- Each coat typically absorbs in under 10 minutes, dries clear
- Apply in surface temperature range between 50-90 degrees F.
- No special environmental or safely precautions
- 28 day cure process (like concrete)
- Do not apply in the rain
- Certified contractors & training available

▪ DensiCrete  has been successfully applied to the following:

• Concrete highway bridges and roadways
• Poured concrete slabs in loading areas
• Structural concrete walls of commercial buildings
• Concrete parking garages
• Structural concrete and masonry walls and basements
• Concrete amusement park water rides
• Concrete sidewalks and driveways
• Concrete production floors
• Concrete roofing
• Concrete elevator shafts

DensiCrete retails for

$20.00 per 32 0z. Bottle
$50.00 per gallon - One Gallon Pails
$40.00 per gallon - Five Gallon Pails
$30.00 per gallon - 55 Gallon Drums



Contact us at suncoastconcretesolutions@gmail.com
for information on purchasing this product.